Product Features:
The DASBET 36-piece radiator pressure tester and vacuum refill kit is designed for diagnosing and refilling the cooling systems of most domestic and imported vehicles.
The cooling system radiator pressure tester kit Comes with a high-precision thermometer ranging from 0°C to 200°C (0°F to 400°F).
Large pressure gauge of coolant filling kit reads 0–35 psi (0–2.5 bar) for accurate system diagnostics.
Vacuum gauge of radiator leak detection kit measures from -1 to 0 bar (-76 to 0 cmHg)
The coolant filling kit for cars effectively eliminates air pockets and allows for vacuum-based coolant refill. Usage Instructions:
Ensure the engine is cool, then open the radiator cap.
Select the proper adapter that matches your vehicle’s radiator opening.
Secure the adapter and check if the sealing gasket fits properly.
Connect the joint piece to the adapter.
Use the hand pump to build pressure to approximately 10–15 PSI.
Observe the gauge:
If the needle holds steady for several minutes, the system is functioning normally.
If the pressure drops, there may be a leak—repair is necessary before continuing.
After testing, use the pressure release valve to release pressure until the gauge returns to zero.
Before storing the tool:
Reconnect the adapter, pressurize a few times to release any residual water or air.
Inject air into the inlet at the back of the pump to lubricate the piston, then repeat the process to expel any remaining gas before storage. Package Includes:
1 × Adapter for Tesla (Model Y, Model 3)
17 × Universal radiator adapters
2 × Connectors
1 × Adapter Spanner
1 × Universal Adapter
1 × Coolant Hose
1 × Pneumatic Vacuum Coolant Refiller
1 × Thermometer
1 × Radiator Manual Pressure Tester
3 × Radiator Cap Test Adapters Specifications:
Material: Brass, rubber and nylon
Length of Hose: 46in/116cm
Piece: 36PCS
Thermometer Range: 0°C - 200°C (0°F - 400°F).
Pressure Gauge of Coolant Filling Kit : 0–35 psi (0–2.5 bar)
Vacuum Gauge of Radiator Leak Detection Kit: -1 - 0 bar (-76 to 0 cmHg)