This was obtained for installing on Bose QC35 headphones. The original bad had a cloth/felt material on the bottom where this one is all faux leather. You will need to destroy the original band cover with scissors because the top and bottom is all one piece. The replacement is 2 piece and easily snaps together. A screwdriver is included for swapping out the end caps. Install is easy and this gives new life to my expensive well used Bose headphones. Recommended Read more

I've got an old set of qc35 headphones where the headband had started to perish and flake so I picked this up to try and revitalise the headphones. I'm slightly worried when the box arrived with sticker over half of the instructions, however, it turns out when you open up the box there are another set of much more detailed instructions inside. The set includes the two halves, the headband, and a little screwdriver. You have to undo some of the tiny screws on the existing headband retaining clips and then the instructions require you to take a pair of your own scissors and cut off the old headband without damaging the cable. Beneath. This is perfectly possible as long as you are very careful. I have to admit I was a little worried because I couldn't dry fit the replacement headband until I had cut off and destroyed the original. Once you take off the headband. In my case, there are a couple of plastic retaining pieces holding the cable in place which were going to interfere with the clips of the new headband. I ended up using a little bit of electrical tape to tape the cable in place. The two halves the hip bone then clip over the metal frame of the headphones. You put the original clips back at the end of the headband and screw them back together again using the original screws. It is a bit fiddly but I had it done in about 5 minutes. The new headband looks almost identical to the original, although it misses the suede effect on the inside of it, replacing it instead with a faux leather. The foam is nice and squishy and it feels comfortable on my head without any additional bulk. Also, the miniature screwdriver that's provided is quite decent quality and I'll be adding it to my toolbox for when I come across teeny tiny screws in the future. Read more

fits perfectly on my headset so I didn't have to buy a new set just because the headband is disintegrating. Read more

🔸🔹🔸🔹🔸🔹🔸🔹🔸🔹🔸🔹🔸🔹 🔵 Que contient le produit ? - l’arceau de remplacement - Un tournevis - Une notice 🔵 Mes impressions Le packaging est perturbant au premier abord car on a l’impression qu’il manque une pièce mais le tournevis à visiblement été amélioré et la boîte pas encore… Mise en place très simple, il faut dévisser les 4 vis, d’éclipser l’ancien et le remplacer par le nouveau. Le tournevis est aimanté et à l’arrière tournant ce qui facilite grandement le remplacement. 🔵 Conclusion Mise en place très rapide, en 5 minute chrono sur mon Bose QC35 (compatible aussi avec le QC45 et le QCSE, ce sont les même) 💡💡💡💡💡💡💡💡💡💡💡💡 Read more

The first thing to mention is that the seller doesn’t advertise that you’ll need to destroy the original headband to install this. Thankfully, my original headband had already been severely worn out, so I didn’t mind ripping it off. Once installed, they look amazing – it feels like I have a new pair of headphones. The clips fit tightly, and everything fits snug once assembled. Additionally, it's thoughtful how they include a quality screwdriver with a magnetic tip, which made it much easier to handle the tiny screws and prevent them from getting lost. Highly recommended for anyone whose original headband starts to warp and look heavily used! Read more