This is an improved web launcher device. The principle is to launch the projectile and the rope by the force of a spring. The projectile, equipped with a magnet, can adhere to iron products after being launched. If the magnet is equipped with a suction cup, the projectile can adhere to a smooth, flat object. With the built-in rechargeable battery and motor, you can quickly retrieve the rope by pressing the retraction switch.



How to use?



Launch

1. Press the spring until you hear a "click" sound, indicating that the launch is ready.
2. Use your ring finger or middle finger to press the launch board and hold the position for about 2 seconds until the launch is complete (Note: if you release the pressure along the way, this may interrupt the launch).



Recovery



1. Make sure the launch board is released.
2. Press the retraction switch until the rope is completely retracted.



FAQ:



Q: Why does the object not charge or retract?



A: The following situations indicate that the charging function is normal: 1. The light is on during charging; 2. It turns off after being fully charged.



In general, the load is not a problem, the problem may be a faulty winding (tangled rope); Regarding the non-shrink problem, please see the following item.



Q: What if the object does not retract?



A: 1. Open the lid manually without any tools. (The instruction manual is accompanied by an orientation in pictures)



2. Remove the entire rope from the box and untie all knots.



3. Pull the entire rope from the launch port.



4. Reinstall the cover in place and resume normally.



Q: What if it can be retracted normally but the launch distance is very short?



A: Use your ring finger or middle finger to press the launch board and hold the position for about 2 seconds until the launch is complete (Note: if you release the pressure along the way, this may interrupt the launch).