Un gabinete pequeño, pero útil para lo que yo quería. No esperes muy buena calidad de materiales. Otra cosa positiva es que si viene con los tornillos necesarios para armar una PC en este gabinete Read more

This is a great little case for a basic no frills office PC build. I love the compact size which is just barely large enough to mount a micro ATX board in and by far is the best thing this case offers. The cooling fan is the old school one that plugs into the older, large PC power supply power plug (like for old IDE drives) instead of the more modern/desirable mini 3 or 4 pin that plugs right into the motherboard but the fan is quiet which is nice and more than enough to cool a 65W CPU that I used. Most basic PC builds are just a motherboard with CPU that is graphics capable, M.2 primary storage and a stick or 2 of memory - so everything on board - so I like the compact size that just barely fits the matx board for that basic build. I don't think I'd try to install a graphics card in this as there is no depth and the volume is tight for hot air to collect in; however I did install a small PCIe card to provide old LPT type printer connection. The cover plate for PCIe is a bit janky, it is just a 90 degree plate that screws on top of your peripheral card(s) and needs to be snapped off the back of the PC in order to pop the motherboard in. It feel like a bit of an afterthought and probably could be done better but that is a minor gripe. The feet are hard plastic and not rubber so they will slide around a desk or hard floor, I would have preferred rubber but that is minor and can be remediated/hacked if it was really a problem. Finally the case is a bit thin and tinny but I think many are today at this price point so again not terrible as its probably durable enough for a desktop PC. Finally the design is very basic, industrial, utilitarian, not really a minus - just what you get at this price point. I really wish I could get a slightly better version of this case with slightly heavier gauge material, rubber feet, and a 250W-300W UL listed power supply to use for basic builds but until I can find that combo I would but this again. Only negative now that AI have build a couple of PCs using this case is that tthe back side of the PC doesn't come off to allow access to the bottom of the motherboard which is often necessary when attaching an OEM CPU fan so I install the CPU and cooler on a bench then install the motherboard into this case with the CPU and cooler already mounted. Negative is that if you ever need to pull the CPU.or cooler you need to pull the board. Read more

I recently purchased the MATX/ITX High Airflow PC Case, and I must say, I'm thoroughly impressed. This case strikes the perfect balance between compactness and functionality. Despite its smaller size, it accommodates both MATX and Mini-ITX motherboards seamlessly, making it versatile for various build preferences. One of the standout features for me is its exceptional airflow design. The case comes with strategically placed vents and fans, ensuring optimal cooling for my components even during intense gaming sessions or CPU-intensive tasks. I've noticed a significant difference in temperature compared to my previous case, which speaks volumes about its cooling capabilities. Build quality is another aspect where this case shines. Despite its affordable price point, it doesn't compromise on sturdiness or durability. The materials used feel premium, and the construction is solid, providing ample protection for my components. Moreover, the layout of the case is well-thought-out, making cable management a breeze. There's plenty of room to route cables neatly, which not only improves airflow but also adds to the overall aesthetics of the build. In conclusion, this MATX/ITX case exceeded my expectations in every aspect. Whether you're a casual user or a hardcore gamer, this case is sure to meet your needs. I highly recommend it to anyone in the market for a compact yet high-performance PC case. Read more

Looks very nice and is compact l! Read more

I had a bunch of older components laying around that would make a nice gaming PC for steam os(in my use case chimera os). I wanted something on a budget and could fit into a tv cabinet. This fit the bill. It unfortunately didn't fit my rx570 which mine measured 260mm the max size this case can supposedly fit. I'm sure if if I really wanted it to fit I could make it but it was just temporary until a new to me rx5600 arrives (that's is shorter). So as temporary solution to my temporary solution I used an rx6400 from another build. A modular power supply would be a lot nicer since you can't run your cables anywhere to hide them. The case didn't have any noticeable sharp edges other then where you punch out the slots for the GPU or other add on cards. Overall I'm happy with what it is. It was less then $50 cad when I ordered it and offers good air flow. I don't think you easily get a 260mm card in this case but your milage may vary depending on the components you use. Read more

I thought the case looked neat and for $35, I decided to give it a go. As others have said, if you keep the limitations of this case in mind, it's an extremely good value. I have the following components in the case: Gigabyte B450m ds3h v2 mATX motherboard paired with a 4600G CPU using a Thermalright Assassin X 90 SE V2 CPU Air Cooler. ATX non-modular PSU 2 120mm case fans on the front. 2.5" ssd mounted on the side/bottom. As you can see, this is not a build optimized for a small case, and while it isn't pretty, it is functional. I have no doubt that with an itx motherboard and modular PSU, it would be clean build with plenty of room. Temperatures were around 50 C when playing Dark Souls Remastered (1600x900, 60 fps using the 4600G iGPU). I have the case placed horizontally. Case feels solid; has good build quality. If placed vertically, case feet are pretty nonexistent, so be aware of that. This is an excellent case for what they're charging. **5/8/2024 Update** I decided to put a GPU into the system. Grabbed a SHOWKINGS Radeon RX 580 8GB, which is about 230mm long. This required me to remove the front fan, memory, and CPU cooler in order to install. It's a pretty tight fit, but as you can see it is doable. Once installed, I was able to reinstall a 120mm fan in front of it. As you can see in the pic, there isn't a ton of clearance between the card and the bottom, but as I have the system on its' side, air flow hasn't been an issue. Temps didn't exceed 69 degrees C when the GPU was at 100% utilization. So, this tiny little $35 case can fit a non-modular PSU, 2 front 120mm fans, a 2.5 SSD with SATA and power cables, and a medium sized GPU. It was a bit challenging to install everything, but I'm not some PC building savant or anything. I intend on installing an ITX MB, NVME SSD, and modular PSU in the near future which I anticipate will greatly improve the airflow and neatness of the system. Read more

Bastante justo para meter una grafica, pero me gusto el tamaño, el ventilador que viene con el case es algo ruidoso pero sirve perfectamente. ＼(^-^)／ Read more

Everything I needed to put in this case fit perfectly. All the hardware, standoffs and screws, are included. What a great case for under $50. No fans were included but I usually upgrade the fans anyway. There is only room for thin (15mm) fans in the front. This case is not for a high-end system with a big GPU and requiring big cooling. I fit a mATX board, 500 watt PS, small graphics card, one SSD, and had plenty of room for cables. Read more

Pretty roomy with some tight cable management. Fitting the GPU requires some finagling, worked with the Asrock Phantom Gaming RX580, but I also fitted a Dell OEM RX5700XT just fine. Even had two 120mm fans mounted to the front and worked with both GPUs in place. Love the small form factor, and it feels sturdy enough. Main gripe would be that the PCIE screw holes on the back of the case don’t line up well and require some force. I would recommend a drill to work the screws in until they grip. Get some zip ties, and some generic round rubber feet as the case doesn’t come with them. Also, if you’re going for gaming rig, plan getting a mother board that has connectors towards the bottom for easier cable management. The MSI A520M and Asrock B450 worked fine in these. Read more