Product Name: One-piece inflatable tent Tent size: 300x200x200cm Package size: 77x33x40cm Net weight:about 16.5kg Main fabric: 150D filament polyester fabric, waterproof index:2000mm+ Accessories: tent X1, iron ground pegs X18, wind rope X10, outer bag X1 instructions X1, pump X1 *Installation steps*. 1. Lay the tent flat, anchor the ground pegs at the bottom corners of the large tent and install the pump. 2. Open the first cover of the air nozzle, connect the pump and pump until the air pressure gauge needle points to the green area of the dial. 3. Insert the rest of the floor pegs, pull the wind rope and secure it properly. *Safety reminder*: When using the pump, please be careful not to over-inflate the air column to avoid rupture. Reminder for summer use: In summer when the temperature must be high, the air column will break due to the expansion of the air inside caused by heat, so please reduce the amount of air when inflating and use while adjusting. Care instructions: Please wipe and dry the tent in advance after rain or when storing it in the early morning when dew condenses, to avoid mouldy smell and even mouldy spots. When the tent is on hard and rough ground and pegs cannot be used, the tent can be fixed by pressing a heavy object against the skirt. Before closing the tent, please roll up the large frontal curtain before closing the tent to avoid scratching the curtain with the pole frame. Please keep the tent away from open flames and do not use it in extreme weather.