About Brand Vision

Create the future, interpreted as "With the help of programming and 3D printing technology, we can create almost anything—Elegoo provides geeks with the key to a new world.”

Basic Parameters

XY Resolution: 19*24um [12K 11520*5120]

Z Axis Accuracy: 0.01mm

Layer Thickness: 0.01-0.2mm

Printing Speed: Max 150mm/h

Power Requirements: 100-240V ; 50/60Hz ; 24V/7.5A

Dimensions: 305.9mm(L)*273mm(W)*562.5mm(H)

Build Volume: 218.88mm (L)*122.88mm (W)*260mm (H)

Net Weight: 12kg

Technology: MSLA Stereolithography

Light source: COB + RefractiveLight Source (wavelength 405nm)

Operation: 4.0-inch Capacitive Touch Screen

Connectivity: USB Interface & WiFi

Slicer Software: Chitu Box & Voxeldance Tango

Precautions

Please keep the 3D printer and its accessories out of the reach of children.

Please fill the resin tank no less than 1/3 of its volume, but do not exceed the MAX line position.

Please place the printer in a dry environment and protect it from rain and moisture.

If you run into an emergency during use, please turn off the power supply of the 3D printer fifirst.

Please use the printer indoors and avoid direct sunlight and a dusty environment.

Please use 95% (or higher) ethyl alcohol or isopropyl alcohol to wash your model unless you are using water washable resin.

If the printing fails, you need to clean the excess cured resin in the resin tank and change the resin, otherwise, it may cause damage to your printer.

When operating the 3D printer, please wear a mask and gloves to avoid direct skin contact with the photopolymer resin.

If the release film in the resin tank is whitened, scratched, or has no elasticity, the printing failure rate is high, please replace the release film in time.