Awesome little number pad, little bit of a pain to get it to work in VIA software, but once its there, its easy to configure - also very easy to add multiple layers for when you want to use it as more of a macropad than a numberpad. Read more

For around $15 it's a good deal. The Quality is fair and good for the price. Everything feels alright. The only issue is the software optimization through VIA which is poor. I tried every method I found online and this what made it work for me. The only json profile that worked was the USB V2 Factory version. First, go to settings in VIA app and enable the "Show design app" option. This will unlock the design tab where you will be able to load the json profile for the number pad . Second, in the design tab, you need to enable "Use V3 defenitions (deprecated) option. Then, load the json profile that works with your number pad without errors (like I said earlier mine was USB V2 factory version). This will load the number pad template. Third, this is where it gets annoying, choose configure tab, if it shows it is searching for devices, try the following. Turn "Use V2 Definitions) off and on and see if number pad is showing in configure tab or try disconnect USB and connect again to see if this works. You can also try delete the json profile and load it again while following the previous steps until it works. Once it work, It will show the number pad with the option to configure to your liking. Layer 0 is the default number pad layout. Layer 1 is for Fn key combination. Layer 2 & 3, not familiar what are these for. Since I used the USB V2 factory version the volume knob will be shown as keycaps instead. Read more

使い始めたらキーが戻らなくて焦りましたが、どうやらスタビライザーのグリスが固いだけで、しばらく上下させていたら改善しました。 その後は極上のコトコト感です！あまりに良くて同社のキーボードも気になってきました。 他のレビューで基盤がたわむなんて指摘もありましたが、それはガスケットマウントの正常な動作で無駄な圧力を逃がしているだけです。 逆に気になったのは、無線を使わないのでバッテリーを切っておこうと分解したら、ガスケットの役目をしているウレタンっぽいフォームが変なふうに挟み込まれて潰されていました。 組み立ての甘さを感じましたが、個人的には何も支障を感じないので問題なしとします。 Read more

I've gone through three of these so far and I'm going to get something else because the build quality is just too poor. Two of the units just constantly rebooted and one of the units had defective stabilizers. It's enticing for $30 but considering how poor the quality is, I just think it isn't worth it. Then you add on the fact that it has south facing LEDs, so pretty much no shine through key caps will look good. Hard pass. Read more

Ich habe mir neulich die EPOMAKER EK21 VIA Nummernblock in Schwarz mit den Mulan Switches geholt und bin echt begeistert! Obwohl ich die Optik anfangs nicht so toll fand und sie nur wegen des Angebots gekauft habe, hat sie mich komplett überzeugt. Die gelben Keycaps, die dabei waren, sehen super aus und werten das Design deutlich auf. Die Mulan Switches klingen klasse und das Tippgefühl ist einfach top – siehe Video. Die Tastatur ist die perfekte Ergänzung zu meiner 60%-Tastatur im Büro. Ich hätte nicht gedacht, dass ich mein altes Numpad so oft benutze und vermisse, daher die Anschaffung. Hot swappable war für mich entscheidend aber die mulan switches sind super und bleiben. Insgesamt bin ich mega zufrieden mit der EPOMAKER EK21. Sie ist nicht nur praktisch, sondern sieht auch gut aus und ist von der Verarbeitung hochwertig, ist halt dennoch Plastik und kein Alu aber dafür: Klare Kaufempfehlung! P.S. Via nicht benutzt. Read more

Great number pad, snappy and love the sound of the switches - it’s actually a joy entering numbers! Read more

購入後、しばらく使用しました。 打鍵感は好きです。（現在、キーキャップ交換して使用） 個人的なマイナス点 ・VIA対応…私が購入した2024年11月、ほぼ使用できず。 私はVIAってソフトが信用できません。 おかげでこのテンキーの機能の大半が使えていない気がしてる。 ・こちらのキーキャップ… 上段3個のキーが何だったか忘れましたｗやっぱ通常のデザインのほうが良いですよ… ・できれば角度調節が欲しい 一緒に使用するキーボードと高さがずれる！低くすればいいやん→低いのなんか苦手なんです。 とはいえ、気に入ってるので、新たにテンキー出ないかなぁ。 Read more

Quality is terrible! LEDs are different! Software doesn’t work! It cannot discover the device. Knob is too tight and inaccurate! Don’t waste your money on products of this manufacturer. Read more

Been using it for months and it is working perfectly fine. Tho if you're a fan of clicky switches, you can swap them so all good! Read more

When I moved to a TKL sized keyboard (without the number pad) because I was running out of desk space, and the keyboards with TKL had gaming in mind. I was regretting the move because I really use the number pad for work and just anything that requires alot of numbers input. So I bought this with the Gateron Yellow Pros and I have it just sitting above my mouse but lined up with my keyboard where it would normally be horizontally. Man it really feels like a complete keyboard only now I have more space for my mouse and everything else. The Gateron yellow pros are a nice linear but creamy key press down. I don't know why I didn't jump to this setup earlier!! This is a high quality number pad which allows wired, wireless. I will never go back to a full sized keyboard again because of this amazing number pad. I rate this a high 5/5 stars. Read more

I like what you get physically with the device, and far cheaper than X model (do to the plastic build) and maintaining the 3 types of connection is invaluable. However the VIA software if you are doing macros are problematic. If you don't mind tinkering to try different approaches perhaps, then it's a great price. but I would of happily paid more if the macro component of the software Read more

Unlike what's marketed on the box this keyboard IS NOT compatible with VIA. It's also not listed on the compatibility list on the VIA website. I installed the VIA app and it just keeps searching for devices. I did some digging around and someone suggested to enable the Design tab in the VIA app (dev mode) and then enable "V2 definitions" and load the JSON file provided by Epomaker. It did all this but whatever I tried, it just isn't working with VIA. It keeps " Searching for devices" Read more

I bought this as I’m using a 60% keyboard and missed a numpad. Honestly I bought it because it was cheap and I’ve genuinely been blown away! I got it with the Gateron yellow switches so can’t speak for the flamingo version. The keys are quiet and feel really good quality, worked straight out of the box and was easy to link to VIA with the instructions included. Very happy and will more than likely buy another keyboard from Epomaker soon. (Image includes G502x Plus Wireless for scale) Read more

Very good little numpad with nice features like southfacing LED, gasket mount and so on. It is very too lite, simple to fix tho by modding it and it also helps making sure it doesn't slide while using. Front and back plate are OK but both are fingerprint magnet, kind of cheap and epomaker logo is way too big for my taste. Both plates are very easy to remove and replace with something else like wood insert, etc. Works well, can look great and the price makes a lot of sense when compared to other numpad with similar or even less features. Read more