Excelente producto Read more

Works great! I like the nozzle station .. Working good so far Read more

Shows 500 on the temp readout, but doesn't melt anything (kester 44) after only 6 months of use. Update: changed from 1 to 3 stars, it needed a new heating element, it comes with two in the package. Unfortunately the only place I can find replacements is AliExpress. For comparison, I had a super cheap rework station before this one that I used for two years with the same element, so I think 6 months is still not great, hence 3 stars, otherwise the station is decent. It does take a little longer than I expected to come up to temp after removing the handle from the cradle. Read more

It functions well, as intended.. No problems seen so far after purchasing it a long time ago. Read more

This would be an ok product if it worked. While it worked is was decent, a little noisy and seemed to draw more current than the 700w rating. I got it for smaller boards because my 1000w air gun had the lights flickering. I had the cheap 40$ 700w ones that do fine and don’t affect the wiring at all so I figured this one wouldn’t bother the lights either but it did. Beware….. the tips are coated with something that take a minute to burn off and should not be inhaled. That’s fine, just take notice Anyways 2 days in and I’d hear an occasional crackle or something, not really a crackle, closer to a click. I assumed it was a relay or some switch in there so I paid no attention. And then I had this little resistor on a board that just didn’t want to heat up, even with regular leaded solder. So I cranked it up but was at a lower air setting so I wouldn’t blow the part off the board then I heard that click and I notice the scope image was getting darker. I looked up and notice the gun was coating the board with some dark soot from inside the gun. Needless to say this gun was either defective or can be set to an unsafe setting. I think it’s the latter. I wouldn’t take it above 430 on a slower setting and never above 450. Why they allow it seems reckless. Honestly I think you can get a quieter, better performing device at 40$ even when this thing was working. You’re paying for a few extra tips, and 3 save settings and a heavier base. What better wiring is hopefully in the base seems to be traded off by the gun design. Update. Replacement lasted a few months then started cooling down. Calibration doesn’t help, heat seems to pulse now. So maybe 20% of the time it’s around the set heat. Can’t use it anymore Read more