The prints turn out well but I have issues with stringing. Prusa Mk3s. Default PETG settings in Prusaslicer left me with stringing. Prints are very good apart from the above issue. I have dialed temperatures down to 230 bed 85. From a temperature tower, will try 225. Prints on textured plate and remove easily. Recommended as value for money. Read more

I bought this primarily to make Lithophanes and it serves this purpose very well. The prints it produces are of good quality, and it's not a hard material to print with. It's very forgiving on temperatures and settings. Would make a good beginners filament because you can't really go wrong. Bargain priced too. Read more

Runder roter Deckel öffnet sich dauernd Read more

Is ok but a bit of a grayish tone and doesn't flow the best, but it's would pretty good. Read more

I have been wanting to try the silk filaments for a while, but never had a suitable project. This Kingroon tri colour filament comes in at a great price. The print quality is perfect. The red and blue can blend together to make a deep purple colour. The light reflects all of the colours and this gave me the idea to print some Christmas decorations. I removed the filament straight from the pack and into the filament drier, the hygrometer only registered 30% rH, perfect for PLA. I completed some filament calibrations prior to printing objects. No problems with bed adhesion, filament feeds without tangles. I have heard silk pla's can be difficult to print with bed and layer adhesion issues, but I have had none of these problems with the kingroon filament. Prints great with layer heights of 0.2 or 0.1mm. I have no reservations about recommending this filament. Read more