Genu das, was ich mir gewünscht habe. Bietet alles, was der ZigBee User, der Home Assistant oder ähnliches nutzt, benötigt. Ist sogar ohne HA als Ersatz für die vielen Bridges verschieder Hersteller (Hue, IKEA, etc.) hernehmbar. Read more

Macht was es soll, sehr zuverlässig und wird auch selbst direkt von Home Assistant erkannt. Read more

I’m very satisfied with this device! Read more

Put this in as a Zigbee coordinator and it immediately stabilized my entire Zigbee network. With its LAN/PoE connection it’s easy to centrally locate. Very easy to setup and works perfectly with Home Assistant. This solved all my zigbee issues. Read more

Has been running for 3 months non-stop with only reboots being power outages. Simple to setup in home assistant, no issues with range and connectivity so far. Seems to be a great value over high priced alternatives. Read more

Mein Home Assistant Server steht im Keller und daran direkt angeschlossene USB Zigbee Adapter hatten es schwer die Zigbee Geräte im Haus zu erreichen. Bei manchen scheiterte es gänzlich, bzw. extrem zeitverzögert. Der SLZB-06 (dieses Modell wird als am zuverlässigsten beschrieben, auch wenn die anderen teilweise moderner sind) ist nun zentral im Haus angebracht und ist über das LAN mit dem Home Assistant Server verbunden. Damit sind alle meine Zigbee über MQTT in HomeAssistant ansprechbar. Anleitungen dafür gibt es massenhaft im Internet und bekannten Videoplattformen.SmartHome Erfahrung von Vorteil. Besonders hervorzuheben ist das extrem einfache Firmware Update über das Web Interface und die Möglichkeit das Gerät als Coordinator, bzw. Router zu verwenden - ebenfalls über das Web Interface, das seit kurzem auch Matter over Thread und Zigbee Hub (Beta) als Modi anbietet. Es ist sogar möglich Remote Locations (Z.B. einen Zweitwohnsitz) über das Internet via WireGuard (VPN) anzubinden. Die Einrichtung erfolgt wiederum im Web Interface. Kann das Gerät für HomeAssistant affine Personen empfehlen. Die Konfiguration wird durch das Web Interface und der Internet Community perfekt unterstützt. Es ist aber wie bei jedem SmartHome Gerät Konfigurationsarbeit und grundlegendes technisches Verständnis notwendig. Read more

Small, lightweight, and easy to setup & use. Nicely constructed built-in web interface, and good instructions on how to use with Z2MQTT. I've installed 2 of them using POE and they work like a charm. Read more

Could not get it to work with HomeAssistant, when using LAN/PoE. Read many other had issues when using the LAN connector, and switched to USB. I bought it exclusively for the PoE LAN, so ended up returning it. Read more

Pros: * POE makes positioning these a breeze. No more "dead zones." * Rock-solid in both Zigbee coordinator and router roles. * Role for Matter/Thread is currently in beta, which may offer a bit of future proofing Cons: * A bit pricey (purchased 3 at ~$65 each). * These are not "plug and play" like a USB coordinator, you need some IT/HA/Z2M experience to get them configured Locations: * The coordinator is located roughly in the center of the primary floor. * One router in the basement on one end of the house. * One router in the upstairs hallway on the opposite end of the house. Technology Environment: Home Assistant OS virtualized on Proxmox with ZigBee2MQTT integration. Experience: These devices are not for someone looking for an "it just works" Zigbee installation, however, the complexity gives you the power to build the foundation for an extremely strong mesh. Changing roles requires flashing between different firmwares, which if that is something you have never done before, may be a bit confusing though it is all possible from a WebUI hosted on the device itself accessible through LAN/WiFi. If you are already familiar with Z2M, especially if your current coordinator is already not direct-attached USB, getting these devices deployed and configured should be well within your reach. I completely re-built my mesh after installation and fortified even more with some router-capable devices like smart plugs. We now have coverage to practically every square foot of our home. Read more

Cannot save parameters for static addressing. Many other features just cant be updated. Worthless. Read more

Added to extend Zigbee network to remote building, works great. Home Assistant directly supports the SLZB-06. I use Z2M to send Zigbee device data from the SLZB-06 to Home Assistant. Read more

This configurator is an easy setup in Home Assistant. Full directions are available online at the SMlight SLZB-06 webpage. There are numerous YouTube setup directions too. Zigbee2MQTT is recommended but will work fine with ZHA if you don't want to mess with the MQTT setup. The dongle plays nicely along side whatever Zigbee configurator is presently used so it can be test driven without bothering the present configuration. I have not tried Thread/Matter configuration. Read more

It can be powered via PoE or USB. Can connect to Wifi as well. It has it own's web page where you can configure all it's settings. the LEDs can be turned off (very important feature, thanks devs!) It is automatically detected by Home Assistant and setup is a breeze. It is stable, has not dropped any connections or thrown any errors. Signal seems to be strong and I was able to reach all devices in a large 3 bedroom house with just one coordinator. Highly recommend this! Read more