Model Name:C64 Drift RC car BLUE
Scale: 1:76
Frequency Bran:2.4GHz
Control Distance:30M
Working Time: 30 minutes
Slope angle: 30 degree
Drive mode: two-wheel drive
Proportional steering: proportinal steering
Charging battery: 3.7V 55mAh LiPo
Trim function: Yes
REV: Steering reverse
Color: Blue
What remote conrol can fit this car:Turbo Racing VT system transmitter
1:76 RC car size:60*25.6*17.3mm

Pakcing List:
1* 1:76 C64 Drift RC car
1* P21SVC 4CH remote
2* Car shell without color
1* Stainless Steel screwdriver
1* Type C charging cable
1* Packing box
1* User manual

Troubleshooting steps:
1. Not walking in a straight line: Check if the remote control ST-TRIM is at the center point, and adjust the car to walk in a straight line through ST-TRIM
2. Automatic forward/backward movement of the car: Align the TH-TRIM arrow on the remote control with the center point in the power on state, then turn off the remote control and restart it (reminder: When starting up, do not touch the throttle trigger (trigger) with your hands, which will cause the car to move automatically)
3. When the car runs, it becomes unstable and shakes: If the car is unstable, it may deviate due to terrain and speed issues. If the speed is (100%) fast, the car's grip may be insufficient, resulting in deviation
4. Re code: When the remote control and the vehicle are powered on normally, use the matching code to match the BIND pin hole on the vehicle. The front lights of the vehicle change from flashing to permanently on, indicating that the remote control has successfully paired with the vehicle
5. No response to vehicle forward/backward: When the vehicle does not have throttle function, pull the throttle trigger to the full forward direction and adjust TH-D/R to position 10.