Specification

Item Type: Instant Water Heater

Material: ABS

Weight: Approx. 1489g / 52.5oz

Water Inlet: Cold water from the lower right (blue) into the water heater after heating from the lower left (red) out of the water

Rated Voltage: 220V

Rated Frequency: 50Hz

Rated Power: 5500W

Rated Pressure: 0 MPa

Waterproof Level: IPX4.

Power Supply Connection: Positive (Blue), Negative (Brown), Ground (Yellow Green)

Power Cord Size: 2.5mm²




Instructions for use:

When using for the first time or when the tap water stops, turn off the power first, then turn on the water outlet switch.

The shower head has a continuous water outlet and can be charged. (if this is not the case, the machine may be damaged.)

1. LED display

Power on display

Digital screen standby dark light, long light shows the state of the water temperature, blinking when the set temperature state.

When heating, the screen flashes, indicating that the water is small or high temperature. When "LL" is displayed, it means that the water is large and the temperature is too low.

When "E*" is displayed, it means that the product self test is faulty and the heating stops.

When "-" is displayed, it means shutdown state, it means shutdown without heating.

Temperature Setting Range: 35-55℃. Cycle pressurization to heating.

2. Touch key

The left key is the power on key, long press for 3 seconds to turn on or turn off the power.

The right key is the temperature setting key, cycle press to increase the temperature.

Every time there is a key operation, the buzzer will sound.

3. This product model has a hibernation function. No operation, no water , it will into the dormant state.

After 6 seconds, the state is stationary. When there is and water , it will be highlighted immediately.