Got one for our son, then wound up buying more for all the tvs in the house. Great effect, easy to install, perfect adhesion yet forgiving. Looks to be working great two months in Read more

I bought this for a 55 inch TV and mounted it all the way around on the back just a couple of inches from the outer edge. The corners require a loop to make the 90 degree bend which consumes about 2 to 3 inches per bend. This 13.1 foot kit just made it around starting at the side of the cutout for where the base goes and going all the way around to the starting point. The kit seemed a bit shy of the advertised 13.1 foot length, maybe it's 12.7 foot, so allow for that in your measurements. I also bought the 9.8 foot kit for a 43 inch TV and mounted it all the way around on the back just a couple of inches from the outer edge. The 9.8 foot kit made it around starting at the side of the cutout for where the base goes and going all the way around to other side of the cutout. I had a couple of feet left over which I trimmed off at an indicated cut point. The main thing I like about this kit is the price and that the circuit strip has a black background so it blends in with the TV shell. The remote works well but if you have these kits on more than one TV, then any remote operates all of the strips at the same time. This is good if you are using more than one kit on one TV, but not so much if you have one kit on each TV in different rooms. This can be overcome by using the "duoCo Strip" phone app which is able to differentiate between strip sets for commands. You do that by disabling one TV strip under "My Devices", make changes on the one you want, then enable other TV strip again. It's tricky since you can't name the TV links, but it can be done. However if you use the remote again after that it undoes whatever the app did. The color is good, but there is nothing that could be remotely considered white. The set is strictly RGB so it makes white by turning on all three colors to maximum which is supposed to yield white. But the blue band of the color spectrum has much more ability to transmit so it overrides the red and green and you get a bright pale blue instead of white. For the price, that's okay with me, but when I get my 4K TV to replace my current 55 inch TV, I will opt for a true RGB-W chipset strip. Those have true white LED chips in addition to the RGB chips so for white it turns those on and the RGB chips are turned off. The true RGB-W sets ("true" meaning it does in fact have separate white chips) tend to be in the $30, $40 and higher range. If you don't care about real white, then this set is great. The photo with the black screen shows the white light color. All-in-all I'm happy with the set, the quality and the especially price point. Read more

Works well, no issues with sticking it to the back of the tv and has a wide range of colours and functionality. No issues so far Read more

Love the colors.fit my 43 inch tv perfectly. Read more

Would buy again. Great assembly and perfect lighting on my monitor. Fits perfectly with the leds that came with my desk. Read more