Please Note
There may be some problems when you use the drone due to the operation method. And if the drone occurs to throttle out of control or flight excursion (offset) when you use it, please re-calibrate the drone or email to us.

BETAFPV Cetus Pro Brushless Drone with Altitude Hold Self-Protection Emergency Landing Function Turtle Mode 3 Flight Modes Compatible for FPV Beginner Starters Train Player-to-Pilot

Positioning system: Optical flow/ Barometer/ Laser
Height positioning: Laser/ Barometer
Position locating: Optical flow (effective height 0.3-3m)
Accuracy of auto-hover: Horizontal ±0.2m, vertical ±0.3m (under no wind environment)
Receiver protocol: Frsky D8
Flight controller: Lite 1-2S Pro brushless FC
VTX: 25mW
Camera tilt degree: 30°
Camera: C02 FPV Micro Camera
TX mode: Mode 1 & Mode 2 optional
Motor: 1102-18000KV Brushless motor
Propellers: 40mm 3-blade 1.5mm shaft hole
Takeoff weight: 33.19g (without battery)
Power system: 1S
Battery: BT2.0 450mah 1S Battery (external)
Flight time: 3-5min
Flight distance: 80m (in wide & undisturbed environment)

Recommended Parts
Radio Transmitter -- LiteRadio2 SE Radio Transmitter
FPV Goggles -- VR02 FPV Goggles

FAQ
How can I bind this quad when not using LiteRadio2 SE Transmitter?
You can only bind the Cetus Pro quad with radio transmitters that support the Frsky D8 protocol. After binding, you can use AUX 1 to arm and disarm the quad. Using AUX 2 to switch different flight modes, using AUX 3 to switch SLOW/MID/FAST speed, and using AUX 4 to switch FPV frequency. Check detailed binding process in the Cetus Pro quad user manual.

Package
1 * Cetus Pro Brushless Quadcopter
2 * BT2.0 450mAh 1S Lipo Battery
1 * BT2.0 Battery Charger and Voltage Tester
1 * Type-C Adapter
1 * Prop Removal Tool
4 * 40mm 3-blade Props
2 * User Manual