Compared to name brand, this sander is fantastic! Great speed, power and easy to adjust the air. I also used a 6”soft edge pad and it still worked great. Read more

i use it for auto body in my home garage its a decent palm sander for the money' works pretty good Read more

This orbital sander is amazingly good for the price. I have a 3M sander that I normally use, but I lent it out and wanted to sand on my old VW. I bought this thinking it would probably die as I paid $30 for it. This worked much better than I thought it would. You can really apply pressure and it keeps going. I got my 3M back but I thought it would be fun to finish this project with the much cheaper sander. I have been using it for at least a year now and it still works perfect. Some advice for people that don't have much experience with these: Use an oiler in your air line. If you don't have an oiler, every couple of compressor cycles pour some oil down the air intake. A lot of oil. Run it for a second and start sanding. When you first get it out of the box and install an air fitting, depress the trigger and fill it with oil. If it won't spin when you first try it, spin the disc by hand with the trigger depressed. It will fire right up if it has been oiled well. Repeat the oiling a couple times to make sure that it is lubricated. I can't recommend an oiler enough, especially if you run other air tools with that air line. Read more

Tool works very good, I bought this to refinish a tailgate and worked great. Nice tool Read more

Great little sander for the money. Initial startup, I followed a reviewers advice and added lube oil. It was temporarily stuck with the protective coating from manufacturing or to avoid corrosion while waiting for initial use, but I was able to turn the oscillator and it fired right up. It performed well for the several hours of use I gave it so far. Air consumption is on the heavy side, but my compressor kept up with it. Comfortable to handle and fairly small to allow access to tight places. I only wish the trigger was a pull instead of a push as I like to use a prop rod to lift it up against the sub straight instead of pushing it against. I was sanding the bottom of a boat from underneath, so a pull trigger would be more convenient. Read more