First - This thing is speedy. I've got it paired with a 1TB Samsung 980, and it can hit about 2GB/s if the USB-C port and controller are good enough. The enclosure is very well built, although I have to knock a star off for the screws/hex screwdriver they send you. One screw stripped out and the wrench corners rounded when I tried to remove the screw for initial drive installation. I love that Silverstone provides thermal pads for the entire drive assembly. Once you put all the pads in place, the enclosure+drive is solid. This might cause the enclosure to heat up a lot, but the benefit is that the NVMe inside stays under thermal threshold and stays fast. Overall, I love this enclosure. It's become my main tool at work, and it gets a LOT of use as a result. Read more

Love this. Bought it before I was going to migrate to a new Windows PC. Crazy fast with USB C interface. With a top-shelf NVMe M.2 memory like the Samsung Pro, it will be your "forever" best portable. Its not as small as a thumb drive but it is still quite compact. Read more

So I got this silver stone ssd enclosure to test out some spare ssd's I had laying around from an old system. Or at least that was the original reason. I have found multiple uses for it now, I have started using it just as a full storage expansion. The speeds the ssd enclosure runs at makes it almost no different as if the ssd were plugged into my motherboard. Also thermals with the drives I put in there and tested for a good couple of hours with some gaming loads and file transfers were fantastic. I don't think I saw temperatures above 42⁰ on any of the ssds I put in there. I would highly suggest this product to anyone looking for a quick and easy way to expand their storage on a laptop or a PC with a budget motherboard. Or just to people who are troubleshooting ssd's and doesn't wanna have to go through the hassle of removing other parts to get to the m.2 slots on your motherboard. Read more

I came from a Green enclosure and couldn't be happier. In the Ugreen enclosure, my nvme would overheat and disconnect when moving anything close to a gig. To me, that was useless. With this I've passed over a TB of backup data to it with no drop in performance. It sped through everything only slowing down on some m3u8 playlist files I had (weird). As an engineer, my only tidbit of wisdom to pass along would be make sure you use enough of the thermal pad material on the chips to ensure the lid barely sticks up (up to maybe a mm) before screwing down. You don't want too much because it could bend the circuit board and cause the chips to detach but you also don't want too little that it doesn't make contact with the lid. Also, cut the pads to cover the chips and not the gaps between them. The pads will act more as thermal insulators in the gaps. Also, most importantly, the chip closest to the contacts gets the hottest. It's the control chip. The ones furthest away are the actual memory chips. They don't usually get too hot. Make sure above all else that control chip gets good contact with the lid. Again, you'll know if it does when the lid sticks up a little bit before securing down. As far as performance, this thing is spectacular. I've paired a WD black 2tb NVME with this and it goes everywhere with me. I use it with my phone, my tablets, my netbook, laptop, and gaming rig. It's blazing fast for a type C interface. I've not noticed any hiccups (except with the m3u8 files- but I just checked using a regular flash drive and it seems to just be that file type cause it was slow in that transfer.. . Again, weird). It gets really warm. That's a good thing. It means it's wicking heat away and that why you are buying this thing. Keeping this drive cool is where it really shines! Aesthetics wise, it's pretty small but the sharp corners are a little bothersome. I've thought about macining chamfers but then you lose the black paint and the paint is adhering really well for it being in my pocket and bookbag 90% of the time. It also looks really cool (imo). I like that I can get a product that checks all of the boxes and while costly, its well worth it. But it. DO IT!! DO IT NOW!!! Read more

Solid, well designed product. It would be nice if the cable provided was a little longer. Make sure to use the thermal pads that come with it (not just the ones pre-installed on the top and bottom of the enclosure), because things can get hot. Use the thicker pad if your nvme drive is single-sided, and use the thinner pad if it is double-sided. The pad should go between the PCB and the bottom of the nvme stick. The heat transfer to the fins are really effective. Read more

This is the second time I have bought this nvme enclosure but same problems still exist This product does not give the speed mentioned in the description Please ensure that the product does not meet the specifications mentioned on the site before selling it With Product Notes The box was open, not sealed, and has a scratch near the screw hole It has been tested on more than 5 types of nvme , samsung 990 pro ; samsung 980 pro ; samsung 970 Evo ; Kingston ; WD Black SN850 WD SN770 ; crucial p2 and it does not give more than 800 reads and 700 writes. This means that it is not 20 GB, but rather 10 GB tested on apple MacBook Pro tunderbolt 3 2020 model and I Mac and other windows pc with usb c 4 port Sometimes it disconnects automatically even though the cable has been changed more than once Read more

It does 10GB USB 3.1 max speed is 940 MB with CARDERA. Returned due to faulty screw housing. The 3 stars for the hard work but you better looking for better quality. Read more