The threads for the top cap is leaking. I guess I’m the unlucky person that got a leaky one. It is pretty loud as well, but that doesn’t bother me too much. Other than this it seems fine, pump pushes water pretty well. Read more

Hasta el momento funciona perfecto. Read more

I was having temperature issues with my NVIDIA GeForce GTX 1080. I am not overclocking the GPU, but when involved in high demand graphic applications, the temperature would max out causing the video to freeze. The onboard cooling setup just could not handle the heat load. I purchased this item and added a copper cooling block in place of the original GPU setup. Now I can run the card at 100% capacity and the temperature remains at a stable safe amount. This setup was easy to install and was as advertised. I would buy this again. Read more

All around a pretty good system. A bit on the loud side but its been running in my system for a few hundred hours with no issues. Read more

This took a lot of work because I had never installed one that wasn't already setup (Closed loop). So yes there were a few spills, and chills, but in the end it works fantastically. Do make sure to mount it on the sticky foam pad or you will regret that decision. It is loud against the metal of my case. I would make sure to leave it upright and able to add more coolant as the bubbles appear. I added a connector and hose going out the top of the case for at a least a week. This is day 3 and still getting a small area of air I can see. I first hooked it up with my PSU in bypass mode using a paper clip, it would chug. I was like this is not going to do. It took a while and it finally filled up, and after putting all the PSU wires back on and starting my PC oh man this pump ran like a pump, no more chugging. Filled full in seconds. I am using this and a 360 radiator from freezemod to cool my extremely hot Sapphire RX 7900 XTX nitro+ (101C hotspot and memory). I first bought a vertical, but because Sapphire in their wisdom made the 3 fans actually push the hot air out the top of the card not the back, and my GPU actually got hotter, even after replacing the paste with artic MX-4. So I ordered a watercooler for my GPU and installed it with this Tank system and Corsair Hydro series coolant (Purple XL-8). My temps now are max 72C. hope this helps anyone considering doing the same. Read more