I'm quite impressed by how above it weight (litteraly in that case) it punches. I've built my fair share of computer using far cheaper cases and far more expensive cases. It blows anything under a hundred bucks in terms of functionnality and ease of installation while almost holding up to my Fractal design. I just wanted to buy a cheap case for a computer that had to be in plain sight so I also wanted something that would look good and it's perfect for that. The good : - Easy to build in. It was a brease. Large space at the back for the cables, large cut out and mostly good placement for the rubber grommet. - Looks good. - Plenty of mounting hardware. Albeit no case fans so make sur you have that. - Fun to build in - Spacious, there's place for a 240mm rad at the top with enough clearance to run the cables, I had also enough space for a bigger hard drive cage to use it as a NAS. The bad : - Build quality is subpar. Paint chip off at the edges, feels awfully light when you take it out the box. Break out pci-e cover (they do include a replacement which I like). - It's a big case for it's class. Wider and taller. Makes it easier to work with but it's taking a lot of space. - No instruction, guidelines or whatsoever. You're on your own. Not a problem if you ever build a computer before but make sure you watch a couple of videos if you haven't. - Front panel is weird to remove and requires to much force I'm willing to put on such a slim tempered glass panel All in all, I'm pretty satisfied and all the negatives are outweighted by the fun I had to build with it and the low price. Read more

Wow. This case has gone beyond my expectations and is an absolute steal. The tempered glass front and side panel are prestine, and they don't feel cheap at all. The screws that come with the case are also high quality. Screwing in the SSD or the Hard Drive were a breeze. The mounting on the power supply was no trouble at all. The cable management on this case is extremely easy because there are plenty of places to zip tie cables togethe. Not to mention, the bottom shroud hides the cables insanely well also. There is room for 9 fans, so I went ahead and installed fans in all the slots. With so much room in this case there are endless ways to customize and add cables without the worry of running out of room. If you're looking for a great case, get this one. Your build will not only be clean, but look amazing through this case. I would 100% reccomend this to anyone building a new system. Read more

This was a great case and a great price. Just make sure you have something to connect to a molex connector for the LED fan hub. Aside from that this case did the job, love that the panel has a swivel makes making upgrades or small changes very quickly. Read more

بدون مراوح Read more

This is the easiest and most spacious case I've built a computer in. It doesn't look too big from the outside, but it has ample space for cable management and accessories and it feels very solid. There's a fair amount of space above and below the motherboard, making it easy to access the screws and plug in cables. The massive cable cutout next to the motherboard is very nice too. It has ventilation on all sides with a filter on the top and bottom and I can immediately tell that it has much better airflow than my old case, partly thanks to the 6 included fans (my old case had 4). The included RGB fans look great behind the tempered glass. The fan controller is nice (supports 10 aRGB fans + 2 RGB accessories), although it uses 6 pin fans and the speed can only be controlled by the remote control (as far as I can tell). It does support a hardware switch to change colors, but that isn't included (you could wire the reset switch to be the color selector instead). There is also a motherboard sync port which seems to be a 3 pin RGB input for color control, but again, the cable isn't included. The 2 led accessory ports seem to be standard 5V RGB headers, but you need small RGB to standard RGB adapters. The accessory bag is pretty nice, it has an assortment of different screws, including radiator screws, along with a buzzer, and blank expansion plate. I wish it included the RGB adapters for the fan controller because they're somewhat hard to come by, but I was glad to see so much variety in the included parts. Finally, the case comes with no documentation and there doesn't seem to be a manual online either. It's fairly straightforward, but it was a little hard to tell what screws are meant for what, and there are no details about the features on the fan controller. Overall, for the case, plus 6 aRGB fans and a 10+2 fan controller, it's an amazing deal. While I wish it came with a manual, I'm very happy with the purchase and would definitely buy it again Read more

el gabiete esta bien pero no trae los ventiladores Read more

Very spacious to work in. I was not sure about the sturdiness, but that was a worry I should not have. The frame is very sturdy, no sharp edges. Was a bit cautious pulling the front glass off. Delivery: The box was fully intact, that is always my biggest worry. Glass has no chips and is fitting well. Is it a fish tank? I think it has some small surprises, for instance the grommets are well-placed. Paint quality is more than sufficient. I put in a full ATX board and there is plenty of space to put in a liquid cooler with three fans. The assembly was a bit tricky here and there, it is because I do not have a modular power supply. I would definitely recommend this case, if you like to look inside the computer. There is plenty of airflow as the front plate sits about 5mm away from the case. Yup, glad I put this together. Pro: Easy to assemble and build in Cons: none so far. Edit: small update, I grabbed a bigger modular PSU and I just wish I could remove the disk cage without a drill (which I do not have). Still very pleased with the case, just need to learn cable management. Read more