The hardwire kit contains all the components required to easily “piggyback” from a fuse box of any vehicle. Simply plug the required fuse tap cable into the vehicle’s fuse box,to provide the camera with its own power supply. This allows the Dash Cam to be installed in your vehicle without the need to use the 12V outlet (car cigarette socket). The cable also includes a blue LED indicator to show when there is power available and also when a Dash Cam is connected. If fitted to a "permanent live" supply, the inbuilt minimum voltage limiter will protect the vehicle's battery from going flat. With the Hardwire Kit installed on a "switched live" supply, the Dash Cam will power on and start recording automatically when the vehicle is opened or starts. Compatible with 12-24V for car or truck installations. Total cable length is 5m so the cable can easily be hidden away for a neat installation. Includes: 5V Mini USB power cable, 2 Amp ATO/C fuse (standard), 2 Amp ATM fuse (mini), Fuse tap table (standard), Fuse tap cable ATM (mini) and Ferrite core to remove DAB interference. The Nextbase Dash Cam Hardwire Kit allows you to install your dash camera permanently into your vehicle. This Nextbase hardwire kit is a simple "plug and play" solution to hardwire any Series 2 Nextbase in-car dash cam. A simple plug and play solution to power any dash cam directly from your car's fuse box and keep your 12V car power socket free. The 5 metre wire allows it to be placed out of view. Compatible models include: Nextbase 122, 222, 322GW, 422GW and 522GW. Box Contents: 1 x 5v Mini USB camera power cable 1 x Fuse link cable for standard ATO/C fuses 1 x Fuse link cable for small ATM fuses 1 x 2 Amp Fuse (Standard ATO/C) 1 x 2 Amp Fuse (Small ATM) Instruction sheet