The Volvo FH16 is one of the most popular trucks among motorists. Now this highlight is also available as a TAMIYA model and this in a wood transporter design. The model is delivered as a kit and already includes numerous equipment parts such as photo etched parts for the radiator grille, turnbuckles with chains for securing loads and much more. The model is powered over 70 cm long via the two rear axles. The powerful TAMIYA TR Mighty Tuned truck motor (35T) ensures sufficient power and the coarse tyres ensure good traction. The TAMIYA MFC-03 (300056523) multifunctional unit is recommended for drive, lighting and sound. Due to the enormous length of the model, only the series MFC LEDs have to be replaced with the special ones with longer cable (56549 to 56551). The FH16 is the first TAMIYA truck model in which the cab is firmly screwed. This allows the MFC to be installed behind the seats and the interior is fully visible. Required accessories: min. 4-channel remote control - recommended Carson Reflex Stick 500501006 (6-channel), 500501003 (14-channel) or 500501004 (14-channel LCD display) - 7.2 V NiMH battery pack, charger - TAMIYA fine primer for priming - TAMIYA TS paint for painting. Steering servo + Servo for manual transmission speed controller or TAMIYA multifunction unit MFC-03 300056523 for driving, light and sound functions. Box contents: kit model with detailed instructions, electric motor, 3-speed manual transmission. Technical details: kit model in scale 1: 14 - dimensions Length: 733 mm, width: 194 mm, height: 306 mm. Prototypical ABS body replica of the Volvo FH16 with numerous attachments such as radiator grille and cabin interior parts photo-etched. Stakes and rear loading panel are made from a combination of reinforced plastic and metal parts. The power transmission from the engine to the two driven rear axles. over a cardShaft made of metal. 2 metal differentials on the rear axles facilitate tight cornering. Faithful replica of the suspension (metal leaf springs and friction damper). Includes TR mighty-tuned motor (35T) for perfect power development on the two driven rear axles. Rear tyres with load profile. 3-speed manual transmission can be obtained via an optional 4-channel 4-channel brocontrol system can be controlled, easily removable driver's cab (screwed, not tiltable), very detailed interior. The multifunction unit (not included) can be installed behind the seats.- Recommended accessories: MFC-03 multifunction unit (300056523) for driving, light and sound functions.- Note: Optional accessories are LEDs with longer cable for this model, these are replaced by the standard LEDs in the MFC. (LED red (2LEDs) diameter 3 mm 300056549; LED white (2LEDs) diameter 3 mm 300056550; LED yellow (1 + 1LEDs) diameter 3 mm 300056551). Warning: the instructions should be fully read and understood together with an adult. Keep away from small children. Children must not put parts or packaging material in their mouth. The model may have some sharp corners. Pay attention to it when handling. Read the instructions included with the RC unit and store them for later needs. If difficulties occur during assembly, ask an adult who supervises the work or a model maker with RC experience or specialist dealer. Use tools only for purpose. If used incorrectly, there is a risk of injury. If you use paints and/or glue (not included in the kit), observe and follow the enclosed instructions. Keep the kit away from small children. Prevent children from putting any components in their mouth or pulling plastic bags over their heads.