SVOD Programmer Ver 3 is a universal programmer for various microcircuits. The firmware of the MIO KB9012, KB9016, KB930, ITE8586, ITE8580, ITE8585, ITE8587 and other features in a compact, all modes of working with MIO are available in the basic package, No additional equipment is required. The case is made of plastic, with a convenient folding stand, similar to the type of testers. HOW TO CONNECT:-In the programmer, one communication module is connected, through which you can connect almost any laptop motherboard with a plume (12pcs in the kit) to the keyboard connector. A large online base of motherboards, allows you to save time on studying the circuit board mat. Just chose your motherboard fees in an online database, the software wrote in which connector to put a loop and what cable and all work. In the convenience of work, there is no equal. Application and Testing: - In the software there is a keyboard test for example almost any laptop keyboard, you can check for efficiency using the SVOD3 programmer. The mode of displaying POST codes of the laptop motherboard is implemented. Choose the software in the online base of your motherboard, download, select it in the choice of motherboard, connect the motherboard with a loop to the keyboard connector, and read the post codes by running the software in read mode of POST codes. Automatic detection of "wrong contact" when connecting chips. Pin test. TECHNICAL SPECIFICATION:-Port of connection to the computer: USB 2.0 high speed, Connection of microcircuits: zif 48, Number of input / output ports: 48, Supply voltage: 3.3V / 1.8V. SUPPORTED PROTOCOLS:-SPI, I2C, 1-Wire, NAND, NOR, EMMC, JTAG, UART, CAN, Parallel synchronous and asynchronous protocols. (At the moment, work is not underway to add NAND, NOR, EMMC chips to software).