Good product but does not justify cost of 1700/-. Unfortunately you won't find better than this. I looked at many other similar products and reviews, and this seem better. Satisfied as you won't see any oil/grease leakage from cylinder. Is clean and easy to use. Can fill Cycle Tyre in 4-6 pumps. PROS: - Good and clean Design - Sturdy - Has rubber attachments at bottom of legs for better grip. - Locking mechanism to keep it closed. CONS: - The extensions provided are of PLASTIC. The threads of those plastic gets damaged so easily and you have to handle it with upmost care. However, it won't last for couple of months. Did not expect such CHEAP thing from this brand. Also the box found was already open & torned. This is the only reason for 4 star. Read more

The Michelin, foot tyre pump arrived on time and in good condition. Thanks, Amazon (Au) and Australia Post for a fast delivery. Fortunately, Amazon (Au) had this pump on a deal, at the same time my old Michelin pump was starting to show its age. I have used Michelin pumps for quiet a number of years and have found them to be dependable and long lasting. I, primarily, keep the pump in the car boot (in all temperatures), in case I get a flat tyre. I wouldn't use this pump to regularly inflate car tyres (it's too slow and exhausting). I occasionally use it, at home, to inflate cycle and wheelbarrow tyres. Metal and plastic components are used in the construction of this solidly built pump. The plunger travels smoothly (I lightly grease the plunger stem for ease of use and to minimise wear and tear). There are no air leaks between the plunger the pump barrel, pump barrel and hose, hose and connector. The connector fits and seals well to the tyre valve. The pump is easily locked closed, by turning the stop at the end of the legs. The pressure guage is only a guide to the inflated pressure. It doesn't replace the need for a precision pressure guage (if required). Care should be exercised, when using the pump. It is not particularly sturdy, in operation (the "price" paid for a compact foot pump). The pump can topple and "kick", unless your foot actions are balanced and in line with the pump action. Slow and surely is the way to go, here. A good compact pump for those occasions we dread: flat tyres. Read more

Tam bir fiyat/performans ürünü Read more

Since a long time I was planning an all in one air pump to cover just everything & this one turned out to be a one stop solution to all needs. All in all in not very costly but effective quality package. ••••••••••••••• INSIDE BOX ••••••••••••••• 1. Pump with 67cm hose & analogue pressure gauge (accuracy +/-1 PSI up to 50 PSI) 2. Adaptors (3nos) - Toy inflator adaptor (plastic) - Sports ball adaptor (metal) - Presta valve adaptor (high pressure cycle tyres) (plastic) • Find these on back side of dial area (pics attached) 3. User Guide ••••••• PROS ••••••• 1. Very good quality product compared to those local ones. Quality is just everywhere. Build, design & finish. All 10/10. 2. Effective single cylinder system with effortless pumping by design. Even you can pump it via hand. 3. Manual mechanical operation instead of electrical. So no dependency on power/car battery. 4. Since mechanical, no water damage issue like electrical one. 5. Multiple adaptors provided to virtually cover every application (more below). 6. Sufficiently long hose with direct connector for bike/car tyres. 7. Highly compact design with locking lever to keep in compressed state. 8. Ergonomic rubber tread plate on top for effective pumping. 9. Anti-skid rubber feet. 10. Fairly accurate pressure gauge with reading in PSI & BAR. •••••••• CONS •••••••• 1. Connector on hose is having brass inners & plastic outers. A bit sceptical about its durability as if its damaged, whole product becomes useless. 2. Presta adaptor for bicycle tyre is fully plastic. Brass one would have been highly appreciated for durability point considering price of pump. ••••••••••••••••• APPLICATION ••••••••••••••••• ▶ Connectors & Adaptors: - Default connector on hose: Bikes, Cars etc - Toy inflator adaptor: Balloons, other similar toys - Sports ball adaptor: Football, Volleyball, Basketball etc - Presta valve adaptor: Bicycle tyres ▶ Pressure Tracking: 1. Bikes & Car: As soon as connector is fully screwed on tyre valve, it pressed needle inside it & gauge shows tyres live pressure reading on dial. So we are able to track the reading while pumping to get desired pressure. 2. Other applications: Its based on intuition & check. After every few pumps check pressure by pressing bicycle tyre or sports ball by hand & stop when its sufficient. ▶Pushes/Pumps Required: It requires approx - 8 to 10 pushes on car tyre to increase pressure by 1 PSI -10 to 14 pushes on bicycle for biweekly top up -15 pushes approx to inflate a normal size balloon ••••••••••••••••••• FINAL VERDICT ••••••••••••••••••• All in all its highly recommended product for intended usage. Its a durable & quality product by Michelin. Just spend some extra bucks here & avoid those local ones which are slightly cheaper. You won't be disappointed. Quality word is synonymous to this product. P.S. Its not at all meant to inflate tyre from 0 pressure to full. Its only suitable for topping up pressure. So those looking for other part will be disappointed as it will require to pump almost 100 times to get to those levels. So its possible but will require a lot of pumping. Read more

Süper bir ürün. Elektronik olanlar ilerde arıza yapar diyerek bundan aldım. Malzeme kalitesi üst düzey, hızlı şekilde hava vuruyor. Görseldeki iki üç çıkmadı diyenler olmuş, ben de öyle sanmıştım ama pompanın alt kısmında takılı imiş , sonradan fark ettim Read more

This pump works well on my Motor bike and haven't had any problem with it. Read more

GREAT Product, thanks to the seller delivered as promised Read more