Nice and light weight but well built so it doesn’t add to your contents weight. I LOVE the top little holders to put little things in so they don’t get lost inside the body of this case!! Wish more companies would have products with this!!! Read more

I use these (yeah, I have multiples!) to store retro gaming consoles, retro computers, and some rPI-400's with the associated peripherals. The case is perfect to put some closed cell foam into and forming custom packaging that you can see into. It is not moisture tight, but I put 1 standard unit of desiccant in each box as condensation kills old electronics. (I store in temperature/humidity controlled spaces too, but better safe than sorry as I don't nitrogen purge/etc...). Since the controllers/peripherals don't usually fit into this box with the console, I pair it with a DWST17806 for larger setups, a DWST17807 for medium, and a second one of these if it'll fit--again, using the closed cell foam and plastic anti-static bags (not necessarily ESD) to keep things from getting more scratches or destroying other things if their cables go to sludge. The extra height of the '07/06 boxes is often required for odd shaped controllers or larger peripherals. I find these are the perfect size and they stack great or go on shelves. There are other options for the tstak series too, like roll around/etc...Plus, you can use them as a stool/seat if needed too. I don't have much use for the storage cups, but every now and again they are useful... especially as, similar to the pro/tough ones, you don't have to use them all at the same time. Right now, I use the cups mostly as organizers in other places... so really a great value all around. The competing setup I looked at was to use pelican cases, but they are very expensive and waste a lot of space relative to these... the pelicans were also much tougher and ship-able.... Tstak is not really ship-able--these are transportable--they'd need extra packaging to ship (and one was damaged in shipping, and that sort of makes the point) However, I don't need a ship-able solution that is waterproof... these are more space efficient and lower cost while still providing excellent performance. Read more

Enough for my drill, screwdrivers, and small array of tools for our large apartment. Its also very sturdy and the latch is secure. I have had no issues, its also very compact which we appreciate. Read more

DEWALT Store: TSTAK Organizer w/Clear Lid (DWST17805), Parts Organizer w/Removable Compartments This product is the DeWALT TSTAK V, Organizer Case with Clear Lid (DWST17805). This container is part of the DeWALT TSTAK V2.0 system of products. The base of the container is black polypropylene polymer. The top of this container is made of clear polycarbonate polymer, a very tough polymer material. This container comes with ten (10) variously sized DeWALT Yellow polymer cups inside the container that most people will be using for the organization and storage of various small parts and hardware items. I will not be using the cups inside the container. This journey began about a year ago when I started purchasing DeWALT TSTAK toolboxes. Then I saw a video where a person had used the original DeWALT TSTAK V (V1.0) container with its clear top to make a special container for storing his DeWALT power tools. That version of the TSTAK V had a molded insert in the container and a set of molded polymer cups. He had taken out the cups, the molded insert, and he had cut a sheet of Kaizen Foam to fit the tools he wanted to store in the container. The video was old and the DeWALT TSTAK V V2.0 has replaced the original TSTAK V container, so there is no longer a molded insert utilized in the container. (Too bad.) I found out about ShadowFoam in the UK and learned that they manufacturer custom cut multi-layered polyethylene foam in multiple thicknesses and they offer a Black and DeWALT Yellow foam. I have learned about Onreva foam available from Amazon and have learned how to cut the foam I need by myself. So, now I purchase the DeWALT TSTAK containers, such as this TSTAK V, and design and cut my own foam inserts to fit my tools and accessories. That is what these two DeWALT TSTAK V containers will be used for. I particularly like the TSTAK products because of their size, their very tough build qualities, and their versatility. Because of the cost of these items, I search and wait for the items I want to go one sale and, fortunately for me, Amazon has had several good sales this year. I am hopeful for the upcoming Prime Day. This is another purchase of the DeWALT TSTAK products for me. They are tough, they fit together well, and they integrate with the smaller DeWALT ToughCase+ containers, as well. The DeWALT TSTAK cases are made of quality materials, they are very durable, and yet, still portable. The DeWALT TSTAK products are made predominately of polypropylene polymer (for the case body, top, and handles) and they also use Acrylonitrile Butadiene Styrene (ABS) for the latches used to connect the individual components of the TSTAK system. Most of the case handles are over-molded with a Thermoplastic Rubber (TPR) coating to make carrying heavy cases a little easier and more secure. Also, they employ all steel over-center latches to secure the case’s top to the bottom, a steel hinge pin to connect the top and bottom sections together, and the ABC latches utilize a steel hinge pin for strength. Finally, I like that most of the TSTAK V2.0 products have an IP54 rating, though the rating could be higher if DeWALT would add a resilient seal into the top of the case. I really like this product. Read more

I began purchasing tools a few years back to have what I may need when I may need it. DeWalt is my brand of choice for certain. The compartment size, durability, and all round utility friendly design are perfect for storing the tools for the job. The heavy duty latches as well as the composite materials combine to make a beast of a box. Sure to protect the contents from all but obliteration with a color pattern I’ve always found sharp. Read more

Built Ford tuff! This is great. It fits 3 20v batteries, a charger, a cutout tool, an impact and has a compartment on the top for knifes and whatever else small you'd like. I have this attached to the top of the flexvolt vacuum and doesn't budge. It locks in every well. Read more

solid construction, seals well. Pricey for a storage container but seems like it will last Read more

La valigetta è ottima per quanto riguarda lo spazio interno, il coperchio presenta una serie di piccoli vani molto comodi per le minuterie. Di contro devo dire non ha scomparti per dividere i vari attrezzi, è tutto un pò mescolato, e la mia è arrivata senza vassoio, che nelle descrizioni online è presente.....tstack presente compatibile con altre valigette dewalt o stanley Read more

This is a review for the DeWalt TStak Deep Toolbox with Long Handle (DWST17814) known as TStak vii in their TStak product line up. This Deep Tool Box has a top compartment that has fixed dividers for organization of screws, drivers bits, drill bits, etc into seven rectangles. The black plastic top cover has plastic tabs that latch to the yellow plastic main top cover but there is not weather sealing protection when the lid is down. I am not a fan of this design because I see the plastic tabs as a potential point of failure. I had this happen to other plastic tool boxes from other manufactures over the years so it's not specific to just this product line. The good news is that if that does happen, a box stacked on top will keep that top locked in place. The main compartment of the box has metal latches on the body of the box that securely latches the yellow top cover. The box is deep and will hold a good amount of tools. The box is rated to carry 66 lbs and I think it will carry it without issue. With the yellow plastic top design, there's not your typical tool box handle but a very large handle that is easy to grip. Because this is a deep box, this model does not have the smaller suitcase handle like the shallow boxes do. The box does come with a removable tray that can be positioned one way onto plastic tabs on the inside of the box. This tray the same one they use in their mobile deep storage box. It's ok but there's a hole between two sections of the tray below the tray handle. For my purposes, I did not need it and removed it. There is a plastic rings for a lock so it is conceivable lockable, but it is plastic with no metal reinforcement, so if someone wants break in, it would not be too difficult. DeWalt states that it is not lockable unit. One complaint for the US version is that it does not have a water seal gasket and is not IP54 rated like the version sold in the UK and EU. This was easily solved by purchasing 5mm EDPM Rubber gasket that I purchased on Amazon. It took less than five minutes to install with no glue (see picture attached). The gasket fits perfectly in the groove on the top cover. I started and ended at one of the plastic top tabs that connect to the back hinge so I know it is well sealed. I do not know if this conforms to IP54 rating, but this works for me to add an extra level of protection from dust and moisture. I spent less than $20 for 18m of gasket and was able to use it on 7 boxes, 3 cart boxes and 3 organizer boxes. I am very impressed with the overall build quality of this product line based on its price. I think it is perfect for the homeowner, DIYer and specialized trade person. I love how it all interconnects together. I could see trades people customizing their van with different TStak boxes and pull out the boxes for the tools they need for a given project. With that said, I don't think TStak system is suited for big construction sites where your equipment would take abuse carrying it over rough terrain or using it as a step stool (unless you're real light). The boxes are not of the same strength and thickness as DeWalt's Tough System 2.0 nor Milwaukee's PackOut, nor is it priced the same as those products. The TStak is significantly less expensive. I think there may be an adapter to mount TStak onto a Tough System set up, but I can see people in the Construction Trades wanting an indestructible box that can take abuse. I am invested in DeWalt's TStak system. When I was trying to figure out the best way to store my recently acquired tools, there was an incredible deal the TSTAK™ 3 pc. Modular Mobile Tower system and I picked up three of them. I was so impressed with the build that I knew it was perfect for me, so I have been adding additional boxes with the current discounts Amazon is offering. My plan is to customize each of these tools for my different power tools. I customized this box I purchased with Kaizen Foam for my router, jigsaw and several batteries (picture attached). This is the third box I have customized so I am getting better at cutting out the foam. The box easily handles the weight of these tools inside. I like the idea of having to cut your own foam over the cube product DeWalt is selling. I love the fact that this box can easily clip onto other TStak boxes as well as boxes clipping on to this box. DeWalt has upgraded the box connectors with small metal rods on each end to give it added strength. These boxes are also compatible with Craftsman Versastack which is also owned by Stanley Black and Decker with different colors and different products. In fact, I was leaning toward picking up one of Craftsman version of a 3pc modular mobile system due to a sale going on at one of the big box hardware stores when the other deal fell into my lap. Craftsman has a couple of tool bags that can lock into this system and I think DeWalt for the European market has the same but in the DeWalt colors. Additionally, I just purchased the FLEXTORQ IMPACT READY Impact Driver Bit Set 100 -Piece and it looks like it could lock into the top of the TStak system. I don't think it has the clasps to be in the middle of the stack, but I have not picked mine up yet. I think you can't go wrong with this Long Handled Deep Tool Box nor other TStak components. I hope DeWalt and Craftsmen continue to innovate this product line for years to come. There's a niche for it and it's perfect for me. I'd give it 4.5 stars because of the lack of weather proofing (easily solved), the plastic latches on the attic top and the somewhat lame tray so rounding up it shows as 5 stars. Read more

Produto atendeu a expectativa. Muito bom. Produto chegou 5 dias antes do prazo previsto e bem embalado. Read more

ótimo produto, comprei de presente para o meu marido que tem muitas ferramentas. Cabe bastante coisa, é bem reforçada e resistente. Read more

Id like to say first of all that Dewalt has never let me down. I own a couple drills and other tools including a leaf blower and a weed wacker and they are all well built and high quality. Nothing ever feels flimsy or cheap. I bought these bins to store lego technic and they do the job very well. These boxes are also designed very well. They have a latch for good stack ability and they don’t fall apart. They also have removable compartments in the box which you can rearrange or take out completely. Overall this is a great product from a great company. Read more

I actually did not need a stackable/modular tool box. I just wanted a weatherproof and somewhat rugged box to keep bailout gear under the tonneau cover of my truck bed. I keep an old pair of work boots, gloves, hat, an old jacket, hand warmers - things I'd need if I was dressed normally and had to change a tire, pull someone out of a ditch, etc. in rain or snow. My recovery gear is in my under seat storage - I just needed something for clothes. Other similar products from Milwaukee, Rigid, etc. are priced ridiculous for basically a plastic toolbox. This was simple, reasonably-priced and accomplishes what I wanted. It has a large, sturdy handle, positive latching clasps, is weatherproof and rugged looking. I'm not subjecting this to daily trade use, but I also didn't want a cheesy plastic tote. This at least looks like it belongs in a truck. It's no-frills and is basically a plastic toolbox with a lid, but that's all I needed. Read more

The DEWALT TSTAK Tool Box is a must-have for anyone in need of an organized and durable tool storage solution. The extra-large design provides ample space for tools of various sizes, making it perfect for professionals and DIY enthusiasts alike. The fixed divider allows for customization of the interior, helping you to organize tools efficiently and keep everything in place. This tool box is built to withstand tough conditions, with water and debris resistance ensuring that your tools stay protected even in harsh environments. The long handle makes it easy to carry, and the stackable design allows for easy transportation and storage when combined with other TSTAK modules. The solid construction and high-quality materials ensure that it can handle heavy loads, making it a reliable option for storing and transporting power tools and hand tools. Users have commented on how easy it is to access tools with the wide-opening lid, and the secure latch system keeps everything locked in place during transport. Whether you're a contractor, hobbyist, or just need a reliable storage option for your home workshop, this tool box offers the perfect blend of functionality and durability. The TSTAK system is compatible with other DEWALT storage solutions, allowing you to expand and customize your storage setup as needed. Many users have also noted the excellent value for money, as the tool box is competitively priced considering its quality and versatility. Overall, the DEWALT TSTAK Tool Box is a highly recommended storage solution for anyone looking to organize and protect their tools in style. Read more

Good case but not I want to have Read more