FAMEX 728-84 tool case set with high quality tools Tools for commercial use Many tools Made in Germany Content: 12 combination spanner, 6/7/8/9/10/11/12/13/12/13/14/17/18/19/22mm, made of chromium-vanadium-steel 31CrV3 over matt nickel, made in Germany Combination pliers with induction-hardened cutting edges, chrome-plated with nickel, with 2-component handles, made in Germany Telephone pliers with induction-hardened cutting edges, chrome-plated with nickel, with 2-component handles, made in Germany Side cutters with induction-hardened cutting edges, chrome-plated with nickel, with 2-component handles, made in Germany Water pump pliers, 240mm, with box joint, chrome-vanadium-steel, with guard, made in Germany Peen hammer with handle sleeve, hammer handle with grooved slip, 300 grams 9 Allen keys made of chrome-vanadium-molybdenum steel 59CrMoV4 1.5/2/2.5/3/4/5/6/8/10mm, made in Germany 7 screwdrivers with impact-resistant 2 component handles, blade made from chrome-vanadium steel matt chrome-plated with black tips, made in Germany: 3x slots: 9x 150 with forged hexagon, 7x125, 5.5 x 100mm, 2x Phillips-tip screwdriver Size 2 with forged hexagon and Ph-1 2x cross-recess screwdriver PZ: Sizes 1 and 2 3 200mm, flat, round, triangular workshop files with heavy plastic handles Universal saw for metal, wood and plastic. Made in Germany Utility knife made of fibreglass-reinforced plastic, made in Germany Voltage tester, 125-250 volts, made in Germany Folding rule (wood), 2 metres, made in Germany 3 replacement saw blades for universal saw, made in Germany 5 replacement blades for utility knives 1 roll of electrical tape from the Association for Electrical, Electronic and Information Technologies (VDE) Tool box with special reinforced design: Particularly stable aluminium profiles in longitudinal edge portion and a middle framework, Specially reinforced top, bottom and side surfaces Particularly stable hinges and locks 3 removable tool pallets 1 universal palette in the lid Reconfigurable padded divider in the trunk floor - Top quality for commercial use and the ambitious handyman - Hardness, torque, dimensional accuracy and quality material according to DIN/ISO Tool box with specially reinforced design: Dimensions of tool box: Length: 46cm. Width: 35.5cm. Height: 18cm Weight: about 8.45kg Notes on packaging and use of the tool box: For transport reasons, the tool is packed separately in the luggage inset. The case involves the recording of tooling 3 tool pallets with flexible tethers, as well as a universal palette in the lid. All pallets are removable. To load the tool palettes with the tool, the item is a proposal for the arrangement of the tools. However, the pallets allow other arrangements of mounting, as well as the addition of an additional tool. The special system of straps on the tool palettes allows variability. The straps are extremely flexible and can be stretched to about 3 times the original length. In addition, the straps under the metal brackets can pull through in the relaxed state so that it is easy to set the correct voltage for various parts. When first applying the tools, we recommend that you first hang the tool on the pallets. Then you should start at the edges of the pallet to insert the tools below the holding strips, and then continue with the other tools to the centre of the pallet. If necessary, you can add the case with other palettes. The FAMEX tool palettes on this case model are commercially available (To record additional pallets, it may optionally be appropriate or necessary to remove the dividers out of the boot floor).